Woodpeckers Track Clamp Bench Top 28" x 43" for MFT - TCBT-2843

Woodpeckers Track Clamp Bench Top 28" x 43" for MFT

Actual size = 28-1/4" x 43-3/4" x 1"

ref: TCBT-2843

• Woodpeckers Track Clamp Bench Tops put your track clamps where they belong…in a track. Stop fumbling with the holes in your MFT or similar table. Instead, slide your clamps into a slot just like the one on the underside of your Festool, Makita or Triton track saw guide rail. The CNC-machined tracks in the bench tops accommodate any brand or style of clamp designed to work with track saws. You’re no longer tied to locating your clamps every 96mm…you can position them anywhere along the track and lock them with one hand while you position your work with the other. We’ve made these 1" thick Baltic Birch laminated bench tops in three sizes; to fit Woodpeckers two router table leg sets and the Festool MFT. 
• If you’re tired of working on a warped, worn out, fiberboard table top on your MFT, here’s a replacement top that looks better, lasts longer and works harder. It’s made from full 1" thick Baltic Birch plywood with black micro-dot Formica® laminate on both sides. The track slots and 20mm holes are machined on state-of-the-art CNC milling centers and held to strict tolerances. All the great accessories designed to work on the MFT will work with the Woodpeckers MFT Bench Top, too. 
• When you set up your MFT as a cutting station, just line the saw kerf up over one of the clamping tracks and you won’t cut into your table at all. You’ll probably never replace the top again. 
• If you don’t have a Festool MFT, we offer two additional bench top sizes, 24" x 48" and 24" x 32". These perfectly match our two router table stands, but we also sell them without the stands If you want to build your own custom base.

• 28 x 43 Track Clamp Bench Top for MFT only - (actual size = 28-1/4 x 43-3/4 x 1)
• SKU: TCBT-2843
• Bench top ONLY, clamps etc not included